HID-SX350射吸式抽沙船 射吸式挖沙船 射吸式清淤船

手机扫描查看

品牌：HID型号：HID-SX350类型：工程船航行区域：内河船航行状态：半潜船推进动力：柴油机船推进形式：挂浆建筑形式或机舱位置：中机型船主船体结构：多体船船体材料：钢质船总长：22m宽度：6m最大挖深：7m清水流量：2000m³/h最大排距：1200marea class="lazyLoad"> 

射吸式抽沙船简介General Introduction

u 该船适用在封闭少浪的近海和内陆河流湖泊施工。

u This cutter suction dredger is designed to operate in sheltered inshore waters.

u 是利用强水流使泥沙泛起再让泥沙泵吸走的原理。

u To  use strong water flow to shot sand up and suck away by pump.

u 安装行走的螺旋桨，移动工作方便。

u Easily mobilize the ship by special propeller.

u 前边桥架扇形吸泥作业，达到要求的深度即可前进。

u Anchor back of dredger to positioning and dredger ladder with cutter swingby sector fan-shaped.

u 参考ZC 标准设计，按照企业标准生产。

u Build under enterprise standard with reference to ZC standard，China.

u 全船为焊接钢结构。底板10mm, 侧板和甲板为6mm.；四个压载水舱位于侧附体前后两端。

u She is of all welded steel construction ,bottom plate 10 mm thickness and shell plating 6 mm thickness, 2 double bollards(fwd and aft) and 1 single bollard in the center on each side.

u 整船可拆装，可装入集装箱，适用于铁路和公路运输。

u The whole dredger is dismountable in road transportable sections.

u 发动机和泵位于中间主机舱，两边的侧船体作为燃油舱，压载舱和储物仓。

u The engines and dredge pump are located in the center pontoon, the 2 side pontoons serve as fuel bunkers, ballast tanks and store.

u 主机舱为水密舱。

u Engine room and pump section are accessible by watertight hatches

u 专门为抽沙船驾驶员设计的宽敞明亮的操作室。全室周围向外观察无死角， 配备空调和可调节座椅，工作环境舒适。一名驾驶员操作所有监控仪表，灯光控制按钮和动作指令按钮。

The spacious control cabin is ergonomically designed fitted on a raised platform with all