Dwyer德威尔 GSTA GSTC-C N-D CO/NO2浓度变送器

手机扫描查看

品牌：Dwyer型号：GSTA GSTC用途：CO/NO2浓度变送器测量范围：见描述测量精度：见资料尺寸：请咨询电源：10-35VDC加工定制：否

上海茂培电子科技有限公司

www.mp-shanghai.com

www.mp-sh.com

Dwyer德威尔 GSTA GSTC-C N-D CO/NO2浓度变送器​

The Series GSTA Carbon Monoxide/Nitrogen Dioxide Transmitters monitor the gas concentration in underground parking garages and loading docks. Carbon monoxide is commonly used to measure the exhaust of gasoline engines, while nitrogen dioxide is used for diesel engines. Field selectable current and voltage outputs allow the transmitter to be used with almost any building management controller. For carbon monoxide units, the user can select the output range to be from 0 to 50 ppm or up to 0 to 500 ppm. Nitrogen dioxide units come with a standard 0 to 10 ppm range. The output can be inverted to read 20 to 4 mA or 10 (5) to 0 VDC using internal dip switches.

THE SERIES GSTC CARBON MONOXIDE/NITROGEN DIOXIDE GAS TRANSMITTER monitors the gas concentration in underground parking garages and loading docks. The carbon monoxide transmitter is used to measure the exhaust of gasoline engines, while the nitrogen dioxide transmitter is used for diesel engines. The Series GSTC is compatible with either BACnet or Modbus® communication protocol, allowing the transmitter to be used with almost any building management controller. The GSTC output is communicated over an RS-485 wire via BACnet or Modbus® communication protocol. To maximize the accuracy of the Series GSTC, the sensor can be field-calibrated using the A-449 remote LCD display. When the sensor reaches the end of its life, the display will indicate that the sensor needs to be replaced. BACnet and Modbus® communication protocol recommend limiting the number of nodes in any segment to 32. Therefore, the transceiver may be rated at one unit load. Fractional loads are also acceptable. The Series GSTC accounts as an eighth of a load on the MS/TP network.

上海茂培电子科技有限公司

www.mp-shanghai.com

www.mp-sh.com

Dwyer德威尔 GSTA GSTC-C N-D CO/NO2浓度变送器